MMA Triazine 40% Specifications, COA & Datasheet

What each specification means in the field

Active content is the headline number because it drives scavenging capacity: a 40% active grade carries the reactive triazine that combines with hydrogen sulphide, so a known, consistent active level lets you calculate dosing and treated cost reliably. The alkaline pH (9.5–11.5 in a 1% solution) reflects the amine chemistry and is favourable for the scavenging reaction; it also informs materials selection and the need to keep the product away from strong acids. Specific gravity (1.05–1.10) matters for volumetric dosing pumps and for converting between litres and kilograms on your injection skid.

Full water miscibility means MMA Triazine 40% disperses readily into aqueous and multiphase streams, supporting efficient contact with H2S. The high flash point (above 93°C) makes the product straightforward to store and transport without the constraints of a flammable liquid, while the low freezing point (below −10°C) gives good cold-weather handling and wide storage latitude. Together these properties describe a robust, field-friendly scavenger — but the values that matter for your batch are the measured figures on its Certificate of Analysis, not just the specification range.

COA, SDS and quality assurance

A specification tells you what the product should be; a Certificate of Analysis tells you what your particular lot actually is. Vasudev Chemo Pharma manufactures MMA Triazine 40% under an ISO 9001:2015 quality system, and each batch is tested and released against the specification before dispatch. The COA that travels with your shipment records the measured active content, pH, specific gravity, appearance and other parameters for that exact lot, tied to a traceable batch number. Alongside it, the Safety Data Sheet covers GHS classification (irritant, GHS07, “Warning”, hazard statements H315 and H319), safe handling, personal protective equipment, storage, first aid and disposal. If your procurement or QA process needs the datasheet, COA template or SDS in advance, request them and we will provide the current documents so you can complete vendor qualification before your first order.

Using the specification in system design

A specification is most useful when it feeds directly into engineering decisions. The active content of ≥40% sets the scavenging capacity per litre and is the starting point for dose calculations and treated-cost estimates. The specific gravity of 1.05–1.10 lets you convert between the volumetric output of a metering pump and the mass of chemical dosed, which matters for accurate injection control and for reconciling consumption against invoiced quantity. The alkaline pH of 9.5–11.5 informs the selection of compatible wetted materials for pumps, seals, gaskets and tubing, and reminds designers to keep the product isolated from strong acids. Full water miscibility confirms the scavenger will disperse into aqueous and multiphase streams for efficient contact with hydrogen sulphide.

The thermal data carry practical design consequences too. A flash point above 93°C means MMA Triazine 40% is not handled as a flammable liquid, simplifying the electrical area classification and storage requirements around the injection skid. A freezing point below −10°C gives confidence that the product will remain pumpable across a wide range of ambient conditions, though for very cold climates it is still worth confirming heat-tracing or sheltered storage. When you design or retrofit a dosing system, treat the specification range as the envelope and the batch Certificate of Analysis as the exact working values — that way your pump sizing, materials and control set-points are anchored to real numbers. Our technical team is happy to review a proposed injection design against the specification before you build it.

Frequently Asked Questions